Do TalkTalk have any control at all over the line settings for VDSL2?
I would like to have the SNR increased from 6db to 9db.
I'm hopeing that will stabalise the line enough for the DLM to remove interleaving on my line.( - Correct me if I'm wrong)
Or if interleaving can just be disabled?
I would rather give up some speed in exchange for better latency.
Some Stats:
Max: Upstream rate = 12230 Kbps, Downstream rate = 65175 Kbps
Bearer: 0, Upstream rate = 10183 Kbps, Downstream rate = 54006 Kbps
Link Power State: L0
Mode: VDSL2 Annex B
VDSL2 Profile: Profile 17a
TPS-TC: PTM Mode(0x0)
Trellis: U
N /DN
Line Status: No Defect
Training Status: Showtime
Down Up
SNR (dB): 5.8 5.7
Attn(dB): 19.8 0.0
Pwr(dBm): 12.8 7.6
VDSL2 framing
Bearer 0
MSGc: 18 26
B: 63 41
M: 1 1
T: 64 64
R: 16 16
S: 0.0377 0.1311
L: 16976 3540
D: 1081 223
I: 80 58
N: 80 58
Counters
Bearer 0
OHF: 53026324 1483651
OHFErr: 148 0
RS: 1591015178 1915927
RSCorr: 4122469 28810
RSUnCorr: 1776 0
Bearer 0
HEC: 503 0
OCD: 0 0
LCD: 0 0
Total Cells: 1414908571 0
Data Cells: 225945267 0
Drop Cells: 0
Bit Errors: 0 0
ES: 65 24
SES: 10 0
UAS: 240 230
AS: 96330
Bearer 0
INP: 4.00 4.00
INPRein: 0.00 0.00
delay: 10 7
PER: 1.81 8.42
OR: 105.68 30.39
AgR: 54111.82 10213.89
Bitswap: 58557/58583 1831/1831
Total time = 1 days 15 hours 50 min 56 sec
FEC: 5820609 28929
CRC: 5496 26
ES: 65 24
SES: 10 0
UAS: 240 230
LOS: 1 0
LOF: 0 0
LOM: 0 0
Retr: 5
Thanks