My Large fibre went live 2 weeks ago and on the day it was activated I tried a speed test and got around 38 Mbps. I tried quite a few times since install and it always seem to get between 35-40. Just tried now and got 35.5. I am plugged in to the master socket and wired connection. This seems somewhat low since I understand large fibre is up to 76mbps and medium is up to 38mbps so I'm getting speeds at the high end of medium. Is there anything else I can do?
DSL synchronization status:
Up
Connection status:
Showtime
WAN IP Address:
92.14.177.234
Primary DNS Server:
62.24.243.4
Secondary DNS Server:
62.24.128.198
Upstream line rate (kbit/s):
15215
Downstream line rate (kbit/s):
43454
Upstream noise safety coefficient (dB):
6
Downstream noise safety coefficient (dB):
6.6
Upstream interleave depth:
331
Downstream interleave depth:
2515
Line standard:
VDSL2
Upstream line attenuation (dB):
2.5
Downstream line attenuation (dB):
7.4
Upstream output power (dBm):
3.9
Downstream output power (dBm):
13.7
Channel type:
Interleaved
DSL up-time:
0 days 5 hours 2 minutes 55 seconds