I used to get 4mbps but today the fibre was connected and it's been appaling !
Here are the router stats and there seem to be a huge number of downstream errors? But the ration and attenuation seem ok. The engineer said it might take a while to get up to speed but so far (over 7hrs) it's still terrible..
Line State: up
Modulation: ITU G.993.2(VDSL2)
Annex Mode: ANNEX_B
DSL (Sync) Uptime: 0d:7h:7m:6s
UpLink / DownLink
SNR Margin: 5.9 dB / 3.5 dB
Line Attenuation: 15.4 dB / 32.3 dB
Output Power: 0.4 dbm / 1.4 dbm
Data Rate: 1081 kbps / 3542 kbps
ES: 14 / 4800
SES: 0 / 384
UAS: 80 / 80
FEC: 0 / 902646
CRC: 23 / 59994
Modulation: ITU G.993.2(VDSL2)
Annex Mode: ANNEX_B
DSL (Sync) Uptime: 0d:7h:7m:6s
UpLink / DownLink
SNR Margin: 5.9 dB / 3.5 dB
Line Attenuation: 15.4 dB / 32.3 dB
Output Power: 0.4 dbm / 1.4 dbm
Data Rate: 1081 kbps / 3542 kbps
ES: 14 / 4800
SES: 0 / 384
UAS: 80 / 80
FEC: 0 / 902646
CRC: 23 / 59994
Should I reset the router or wait or is there a problem on the line?